Download BUW EMX (Expert Moldbase Extentions) 16.0.2.1 for Creo Parametric 10.0.2

Link download BUW EMX (Expert Moldbase Extentions) 16.0.2.1 for Creo Parametric 10.0.2

Working with BUW EMX (Expert Moldbase Extentions) 16.0.2.1 for Creo Parametric 10.0.2

Working with BUW EMX (Expert Moldbase Extentions) 16.0.2.1 for Creo Parametric 10.0.2

System: 64bit
Interface language: Multilingual
System requirements: Pre-installed Creo Parametric 10.0.2 (and higher)

Description: Creo Expert Moldbase Extension contains customized detailed packages of slabs and individual elements from all leading suppliers, taking into account the requirements of the main
standards in this area.
When creating a model block, Creo Expert Moldbase Extension automatically generates an assembly drawing, specification and slab drawings taking into account the requirements of the ESKD.
You can create mass components directly in Creo Expert Moldbase Extension or use mass components created in CreoTool Design.
Creo Expert Moldbase Extension has a specialized graphical interface with a schematic two-dimensional view of both finished designs of model blocks and individual components. At the same time, you can create and use your own designs, components, types of injection molding machines used, and enter your suppliers in the database.
The selection of the main parameters of mold components is carried out in two-dimensional mode. If it is necessary to specify the placement parameters of a particular component, the designer turns to a three-dimensional structure. This approach significantly speeds up the mold development process.
As a rule, full-fledged three-dimensional models of the mold assembly with holes, grooves, etc. made in the plates are formed in an automated mode. In this case, all holes and grooves are dependent – when the component for which these structural elements were made is removed, they are also removed. When the sizes and locations of components change, these geometric structures are automatically rebuilt.
Creo Expert Moldbase Extension automatically places fasteners, calculates the length of pushers and marks, and creates cutouts along the contour of the part. To make visualization easier, Creo Expert Moldbase Extension allows you to turn on/off the display of any components.
Creo Expert Moldbase Extension implements a mechanism for opening the mold using animation, with analysis for the intersection of components. The following calculations are possible:
comparison of the compression force of the machine and the pressure created inside the mold;
the force acting on the wedge when it moves (in the movable rod mechanism) for a given stroke;
wedge length;
angle of inclined pusher;
delays (with double opening of the model block);
the total design cost for the manufacture of the mold.
Main advantages
High productivity when designing a model block due to the fact that the designer creates a mold from ready-made adaptive components – “cubes”, for which drawing templates have already been created.
Reduces the likelihood of errors because component placement and all necessary cuts and clearances are fully automated.
A two-dimensional user interface with visualization of changes makes it possible to quickly develop a mold without wasting time on regenerating a three-dimensional model.
Development of a mold for a specific casting machine with calculation of the required clamping force.
Automated creation of a control program for processing holes in slabs.
Calculation of the cost of the mold.
Creation of your own library of plates, components, mechanism designs and model blocks in dialog mode.
Quick learning of the module, interactive reference guide with animation videos.
Key Features
Automatic placement of mold components followed by removal of material in the slabs.
Automatic generation of specifications, assembly drawings and slab drawings.
Automatic creation of associative tables of holes in drawings.
Creation of animation of the operating mode of the mold with analysis of the mutual intersection of components.
Libraries of standard mold blocks and individual parts from leading suppliers: DME, DMS, EOC, Futaba, Misumi, HASCO, KLA, Meusburger, Pedrotti, Rabourdin, Strack, FCPK and libraries according to GOST of the following nomenclature:
design of model blocks (standard set of all types of sizes, double pushing, double opening);
set of slabs and insulation;
centering elements (bushings, columns);
shanks;
locks;
sprue and central bushings;
pushers and counter-pushers;
stops;
fasteners;
pins;
supports;
circuits and elements of the cooling system;
movable rod mechanisms;
inclined pushing mechanisms;
double opening mechanisms;
transmission mechanisms for obtaining threaded models;
hot runner system diagrams, nozzles, manifolds, flanges.
Creation of custom libraries with your own standard designs and mold parts.
If you want to download BUW EMX (Expert Moldbase Extentions) 16.0.2.1 full license, please click to DOWNLOAD symbol and complete check out a little help my website is maintained. The download link is appeared automatically when you complete check out.
CLICKDOWN.ORG Download CAD CAM CNC software
Please see youtube video for download instruction by open *.txt file and copy youtube video link paste to your browser If you don’t know how to download.
Inside folder BUW EMX (Expert Moldbase Extentions) 16.0.2.1, already have crack’s file and instruction how to install BUW EMX (Expert Moldbase Extentions) 16.0.2.1 step by step. I guarantee you can install BUW EMX (Expert Moldbase Extentions) 16.0.2.1 successfully if you follow that instruction.
If you also can not install it or any problems, please contact to me by email: [email protected], then I will help you to install software by teamviewer.
Thanks a lot

By TECHSOFT SUPPPORT

Supply full software, training course over the world

Leave a Reply

Your email address will not be published. Required fields are marked *

error: Content is protected !!