Download Siemens PADS Standard Plus VX 2.15 x86 full license
Link download Siemens PADS Standard Plus VX 2.15 full activated
Description: New features presented in PADS VX.2.15
This release is primarily aimed at adding new features and correcting registered customer defects – service requests (SR). The PADS VX.2.15 release presents the following new products, features and improvements.
HyperLynx AMS
HyperLynx AMS (former PADS AMS) includes the following updates in the PADDS VX.2.15 release.
PADDS AMS renamed HyperLynx AMS
The PADDS AMS simulator is renamed HyperLynx AMS. This name change is made only to better match the simulator with the family of analysis and verification tools in the Electronic Board Systems division at Siemens EDA. Now, when installing and using the tool in the menu and dialog boxes, you will see “HyperLynx AMS” rather than “PADS AMS”. Reorganized list of parameters in the dialog box of parameters selection
When confsing the analysis based on the sweep, the parameters selection dialog box helps select the parameters for change during the simulation. The names of the networks in the dialog box of choice of parameters are now organized hierarchically by the name of the component.
Removed assigned contacts from the list of contact comparison tools
When choosing a modeling model for the symbol, you need to make sure that the symbol contacts are correctly connected to the model ports. The contact matching tool in the dialog boxes of the master of models and symbols and editing the properties of the model helps in this comparison. In the VX.2.15 release, the contact matching tool has been updated, so after selecting the contact of the symbol for comparison, it is no longer displayed in the list of possible contacts for appointment.
HyperLynx® DRC
The sections below contain information about changes in this version of HyperLynx DRC products.
Export CCE file with area-snacking function for HL SI
New CCE export support improves the performance of regulations by structural tasing
• Pruning of the area based on objects – cutting the structure at a fixed distance from certain objects of interest (for example, networks, pins, etc. d.)
• Snuccum by the area based on coordinates – cutting the structure by specifying coordinates
Increased accuracy
Permission in one nanometer
• Improvement of geometric resolution from 10 nm to 1 nm
• Improved accuracy during analysis operations
• Harming the expected permission with Xpedition and other EDA streams
• New Trace Modeler – improvement of calculations for more accurate compliance with the SI product
• Improved accuracy of assembly components circuits in Allegro Translation
HyperLynx SI/PI/Thermal
This release contains the following improvements, as well as numerous defect corrections and safety improvements.
General improvements
• Simplified configuration of IBIS-AMI models for modeling DDR5/LPDDR5(X)
• Modeling IBIS-AMI command/modulation addresses DDR5/LPDDR5(X)
• Simplified setting for DDR5/LPDDR5(X modeling only IBIS
DDRx
The graphical interface of the DDRx batch processing wizard has been improved to simplify the user’s work. Before the VX.2.15 version, the IBIS-AMI configuration was distributed across several pages and required careful selection of the controller/DRAM. Now in the VX.2.15 version of the IBIS-AMI models for the operation can be viewed and configured on one page of the wizard.
The DDRx batch processing craft now supports IBIS-AMI modeling of an unsboiled command bush/address bush for DDR5/LPDDR5(X). Before VX.2.15, this feature was only available for registered DIMM (RDIMM) modules. Now in VX.2.15 HyperLyx may include effects such as alignment of the Tx controller and trembling parameters/niper iBIS-AMI in the simulation of the command/address bus.
DDR5
For simulations, the DDRx batch processing wizard is now automatically replaced by AMI executable when the IBIS buffer model is detected. Before VX.2.15, this required manual editing of the text file of the IBIS model. Performing automatic replacement, the user saves time and nerves and can focus on moving towards the results of the simulation.
Possibility to view modern 3D-plats
• Standard integrated part SI/PI
• Full 3D type of fee or partial view of the area
• Selection and allocation of networks synchronously between 2D and 3D species
• Improved allocation and transparency controls for objects of interest
Compliance with SERDES
Support for the new Compliance Wizard protocol for
• OIF CEI-224G-MR-PAM4
• PCIe Gen 6 Add-in-Card
• System Fees
• Support for Rx FFE COM 4.1 algorithms
• HTML report adds Rx FFE branch weight table for worse/better case
• Improved algorithms of 100G Ethernet and OIF COM
• Updated protocols, including fixes
• 100G Ethernet and OIF
• PCIe Gen 4.5 and 6
• MIPI D-PHY 0-4 Mode
• 10GBASE-KR and 40GBASE-KR4
If you want to download Siemens PADS Standard Plus VX 2.15 full license, please click to DOWNLOAD symbol and complete check out a little help my website is maintained. The download link is appeared automatically when you complete check out.
Please see youtube video for download instruction by open *.txt file and copy youtube video link paste to your browser If you don’t know how to download.
Inside folder Siemens PADS Standard Plus VX 2.15, already have crack’s file and instruction how to install Siemens PADS Standard Plus VX 2.15 step by step. I guarantee you can install Siemens PADS Standard Plus VX 2.15 successfully if you follow that instruction.
If you also can not install it or any problems, please contact to me by email: [email protected], then I will help you to install software by teamviewer.
Thanks a lot